Our
automatic demand switch works quite simply by shutting off the electricity at
the fuse box automatically. The switch detects
when power is needed and regenerates the circuit as required.
Remote Control Demand Switch
Price: $395.00 CAD
Our
remote control demand switch works by shutting off the electricity at the fuse
when prompted by the remote. These switches
are optimal for circuits supporting TV's, stereos, clock radios, etc.
Many studies have proven that constant exposure to
electrical and magnetic fields, emitted by all electrical wiring in the walls,
can be detrimental to our health. In our rapidly growing high-tech world the
number of sources of electric and magnetic fields is constantly increasing. We
must be cautious. Just like allergies often develop from over exposure to
seemingly harmless substances, more of us are finding that we are becoming
sensitive to electric and magnetic fields. Also, epidemiological studies have
shown electric and magnetic fields are known to promote many serious
degenerative diseases.
Biologists and other specialists in the field agree that we must be cautious of
where we sleep. Some of the highest level electric and magnetic fields are found
in our bedrooms. Wiring for downstairs lighting, upstairs receptacles, lighting
and fans commonly run through the ceilings, walls and floors of our bedrooms.
This wiring constantly radiates electric fields, even when everything is
switched off.
The typical bedroom has bedside lamps, clock radios, electric blankets, VCR's,
televisions etc... On average we spend approximately 1/3 of our life in this
room. While we sleep our body grows and tries to repair itself. During this
process thousands of electrical impulses are occurring in our bodies and it is
crucial that we have an interference free environment for this to take place.
Currently, our beds are surrounded by a curtain of electric and magnetic fields
caused by the mere presence of A/C (Alternating Current) in our wiring, even
when everything is switched off. Sleep is the time when our body repairs itself.
If the body is exposed to electric and magnetic radiation during this time, the
immune system will be suppressed and prevent the natural repair process from
occurring. EMF Safety is a concern.
Our automatic demand switches work quite simply by shutting off the electricity
at the fuse box. For example, if a switch is installed on a lighting circuit in
the bedroom , the switch will automatically sense when the last light on that
circuit is turned off at night. At this point the automatic switch has
determined there is no demand for electricity and turns off the electricity at
the fuse box. Therefore there is no voltage present in the wires beyond the fuse
box, eliminating electric fields on this wiring circuit. This is a simple yet
100% effective method of protection from electric fields emitted by this
lighting circuit. With the demand switch installed, our cells will be able to
repair themselves naturally as we sleep.
In the morning, when you awake and switch on the lights, the automatic switch
senses a demand for electricity and automatically restores electricity to this
circuit for normal operation. In most cases, the demand switch is the most
effective way of eliminating unwanted electric fields in the bedroom.
The remote control demand switches' purpose is the same as the automatic switch
except that it is a manual switch, not automatic. One physically needs to press
a button on a remote control to turn off the circuit. The remote control unit is
used to turn the electricity on and off at the fuse box. This can be done
conveniently at bedtime without leaving the comfort of your bedroom. This is
recommended primarily for use on circuits that have electronic devices that
constantly require electricity to operate even, when switched off, for example,
TV, stereo, clock radio and GFI (ground fault interruption) circuits. The
automatic disconnection switch is not designed for these types of electronic
devices or GFI circuits.
