| |
|
|
|
 |
|
Our fiberglass mesh G-ES
is a high resistance latex coated mesh, specifically designed to reflect
analogue and pulsed digital signals from sources such as Microwave,
Wi-Fi, and cell phone towers.
G-ES
was designed for new construction and renovation. It has excellent RF
shielding qualities and is a very versatile product that can be applied
under drywall, under shingles on roofs, in the attic, under stucco and
plaster etc. |
| |
|
| |
|
·
For reduction of high frequency
radiation in new homes, or for renovation of any building |
|
Characteristics |
|
·
Firm fiberglass mesh with woven metal
thread |
| |
|
·
Excellent shielding qualities |
|
 |
|
·
Easy installation |
| |
·
Externally semi-conductive |
| |
|
| |
Installation |
| |
|
| |
·
Roll onto desired surface |
| |
·
Overlap sections by 10 cm (4 inches) |
| |
·
Strap with metal strapping and screws to hold in place |
| |
·
Ground strapping if required |
| |
|
|
| Technical
Data |
|
|
| |
|
|
| Width / Length: |
|
100 cm width/50 m-roll (39 inches wide / 164 feet/roll) |
| Weight: |
|
approx. 180g / sq meter (0.4 pounds per sq meter) |
| Aperture Weight: |
|
approx. 45g / sq
meter (0.1 pounds per sq meter) |
| Aperture Size: |
|
approx. 5.5mm x
5.5mm |
| Tear - Out Force: |
|
Length 1.8 kN / 5 cm, Width 2.6 kN / 5 cm |
| Elongation to Breakpoint: |
|
Length 2.6 % /
Width 2.5 % |
| Shielding Characteristics: |
|
23 - 13 dB
(99.4%-94%) at 200 MHz to 3.3 GHz |
